Production Allowables
Forms
The Annual Gas Overproduction Report allows industry to report overproduction of gas from a well producing under a daily gas allowable.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Daily Gas Allowable Application Form allows industry to request a daily gas allowable amount.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Daily Oil Allowable Application Form (Project) allows industry to request a single oil allowable for oil wells producing from an approved reservoir project.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Daily Oil Allowable Permit Amendment Application Form allows industry to apply for an amended amount of daily oil allowable when the previously applied for amount exceeds the TVD calculated value.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Production Allowable Report – Crude Oil allows industry to report monthly oil and gas volumes, GOR adjusted monthly oil allowable volume and over/under oil production value.
| Version Date | Effective Date | Update |
|---|
Additional Information
The Establishing the Daily Oil Allowable Value for a Well (Instructions) guides industry through the appropriate data selection when completing the Daily Gas Allowable Application Form.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Example Letter: Application for Waiver of Off-Target Production Penalty provides an example of an acceptable application to be submitted to the Commission when applying for waiver of an off-target production penalty.
| Version Date | Effective Date | Update |
|---|---|---|
January 2014 | January 2014 | Updated department name and address. |
The Example Letter: No Objection to Waiver of Off-Target Production Penalty provides an example of an acceptable cover letter to be submitted to the Commission when applying for waiver of an off-target production penalty.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Gas Spacing and Hectarage for the Peace River Block Map can be found at this link:
https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry...
| Version Date | Effective Date | Update |
|---|---|---|
February 2019 | February 2019 | Posted to the Commission's website February 7, 2019. |
The NTS Units Dimensions for Off-Target Penalty Calculations provides a table listing the latitude, width and height of National Topographic System Units. The values are used in off-target penalty calculations.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Policy for Determining Primary Product of Oil or Gas document provides the criteria the Commision uses in order to determin the product type of a well.
| Version Date | Effective Date | Update |
|---|---|---|
August 2014 | September 2014 | Included the value for GOR in imperial units. |
This document is intended to assist in determining the primary product type of oil and gas for unconventional wells.
| Version Date | Effective Date | Update |
|---|---|---|
January 2019 | February 2019 | This is a new document. Users are encouraged to review in full. |
The Production Allowable Report Instructions and Examples document provides instruction on calculation and reporting methodology, with examples.
| Version Date | Effective Date | Update |
|---|---|---|
March 2013 | April 2013 | This document replaces Production Allowable Report – Crude Oil (Instructions) and the Production Allowable Report - Crude Oil Examples 1&2. |
The Road Allowance Consideration for Target Areas identifies why there is no road allowance on the west side of theoretical Section 33, Township 82, Range 20, West of the 6th Meridian, Peace River District.
| Version Date | Effective Date | Update |
|---|
The Waiver of Off-Target Production Application Guideline provides an explanation of off-target production penalties and details of the information required for a waiver of off-target production penalty application.
| Version Date | Effective Date | Update |
|---|---|---|
October 2013 | November 2013 | Various updates have been made to this document. Users are encouraged to review the document in full. |
The Well Spacing and Target Area Regulations (PowerPoint) was given at the Canadian Association of Petroleum Landmen. The presentation includes: information on well types, confidentiality and spacing, the survey systems and target areas, production allowables, reservoir projects and applications, etc.
| Version Date | Effective Date | Update |
|---|---|---|
December 2017 | December 2017 | Added a new slide "Tenure Surrounding a Corner". |